SheShed kitsets are pre-approved in New Zealand for many common uses such as sleepouts, home offices, art studios, and much more, as long as you follow some specific rules. See our summary of the relevant points below, or for more information about building rules, check out: CanIBuildIt.govt.nz
Please note that this is our best understanding of the rules at the time of writing this article, and as the rules change from time to time and the interpretation may be different in different areas, this article must not be considered as covering all relevant aspects, or taken as legal advice. The SheShed team always recommend you check with your local council if you have any questions about local building requirements.
Click on the toggle-button options below to preview your likely consent status.
Including any kind of plumbing facilities for toilets, showers, sinks, or the storage of drinking water?
If used for sleeping accommodation, the facilities (eg bathroom and drinking water) of an existing dwelling must be readily available and used for sanitation.
(If you’re building on a sloped section, measure from the proposed floor level down to the ground on the steepest side.)
Have a look at the table below for a summary of heights, but please note that these heights are excluding any foundation or subframe:
Standard Kitsets (Under 10 square metres): | Medium Kitsets (10 to 18 square metres): | Large Kitsets (19 to 30 square metres): |
---|---|---|
Cottage Garden Shed (5m2) = 2.6m tall. | Cabana Cabin (12m2) = 2.9m tall. | Tasman Cabin (20m2) = 2.9m tall. |
Star Cabin (9m2) = 2.8m tall. | Coastal Cabin (12m2) = 2.56m tall. | Alpine Cabin (19m2) = 2.71m tall. |
Tussock Cabin (8m2) = 2.47m tall. | Ranch Cabin (12m2) = 2.9m tall. | Brook River Cabin (19.4m2) = 2.9m tall. |
Star Canopy (9m2) = 2.8m tall. | Star Deluxe (18.75m2) = 2.8m tall. | Lake Cabin (29m2) = 3.4m tall. |
Whether you need to get building consent or not, there are a few other things you’ll need to have a check of as well.
1. Will your cabin comply with your local council’s District Plan?
Each council creates its own District Plan specific to its area, so rules may vary depending on where your project is located. You must check with your local council to make sure your proposed building work complies with the District Plan. If it doesn’t, you will need a resource consent before building work starts.
2. Will your cabin comply with other legislation?
You may need to consider additional rules and legislation, such as the Resource Management Act 1991.
3. With or without a building consent, you will need to make sure you follow the Building Code.
An example of this is that you will need to include a smoke alarm if anybody will be sleeping in the cabin.
4. Even if (based on the questions above), you do need to get council consent, your local council has the authority to grant you an exemption from it at their own discretion.
An example of this, is someone who needs to include plumping facilities in their cabin for use as a pottery studio. The use of “plumping facilities” would normally require a building consent, but as long as nobody will be sleeping in the cabin, most local council’s are willing to provide an exemption in cases like this.
For more information about building rules, check out: CanIBuildIt.govt.nz
2024
SheShed Australia & New Zealand. All rights reserved.